By JERRY LITTLE

Ag Notes

Every year, we lose a barn or two because of a hay fire.

You can prevent hay-bale or barn fires if you bale hay at appropriate moistures and monitor the temperature of recently baled hay. Generally, hay will go through a heating phase within one to two weeks after baling. During this time, you should monitor the hay to make sure it doesn’t reach temperatures that can damage the hay or lead to spontaneous combustion.

It is not unusual for the temperature within a bale of hay to reach 100 degrees Fahrenheit, and it may go as high as 130 degrees before beginning to decline. If the temperature peaks below 130 degrees, there may be some loss of quality but no danger of fire. With free air circulation around a bale, both heat and moisture can dissipate. A single bale rarely heats enough to catch on fire, but when you place bales close together or stack with other bales that are also heating, it is much more difficult for the heat to leave the bales. A good practice is to leave bales scattered in the barn for three to four weeks before placing them in a stack.

If the bales are wetter than they should be, the temperatures can easily rise above 130 degrees. At 140 to 150 degrees, more microbial growth and chemical reactions within the hay cause it to generate heat at an increasingly rapid rate.

If hay temperatures reach 150 degrees, you need to move bales to allow for better air circulation and frequently check the temperature. At 180 degrees, fire is imminent, and at 200 degrees, it is likely present. In either case, you need to notify the fire department. It is best to wait for them to arrive before removing the hay from the stack in case of a flare up.

Smoke from hay treated with an acid preservative may contain toxic fumes, so keep people away from the smoke and inform the firefighters of any treatments you applied.

To check hay temperature, you may use several types of thermometers. Find one that is durable, easy to use and will measure up to 200 degrees.

Attaching a string or a thin wire and lowering or pushing it into a probe that has been inserted into the hay is one way to use a simple glass thermometer. Do not insert them directly into the hay because they easily break. It is best to use only spirit-filled glass thermometers to prevent accidentally contaminating hay with mercury from a broken thermometer.

You can use electronic thermometers with remote sensors and a digital readout. Avoid LED displays as they are often hard to read in bright light. An LCD is a better choice. Some electronic moisture meters also measure temperature.

Long stem thermometers, commonly called compost thermometers, are probably the most rugged and reliable.  With these types, the price increases with the dial size and length of the stem. It may be tempting to stick these directly into a hay bale, but the stem can be easily bent and the accuracy or operation of the thermometer could be destroyed.

It is best and necessary in most cases to use some kind of hay probe. You can make one for yourself using steel pipe or electrical conduit or you can purchase commercial probes.

Measure the wettest hay first. Probe square bales from the side, round bales from the end. Insert the probe near the center of the bale. In round bales, if the core is loosely formed, probe six to 12 inches away from the center where the hay will be more tightly packed.

In large stacks, it may be difficult to reach the center, but it is important to get at least five to 10 feet down from the top, or in from the side. The most critical factor is to reach where the wettest hay is stored. It is best to probe at several locations and at different depths within a stack to locate the warmest spot.

For more information on hay production contact the Boyle County Extension office.

Jerry Little is the county extension agent for agriculture/natural resources.